KNX news
29 DE AGOSTO DE 2017
NEW DESIGN – TEMPERATURE, HUMIDITY AND CO2 SENSORS WITH TERMOSTAT
Elsner launches a new design, specifically the range of KNX TH-UP Touch controllers, replacing the KNX TH-UP. We are talking about room controllers used for temperature control but can also be used for ventilation control.
Integrated sensors in the KNX TH-UP Touch measure temperature and humidity. In addition there are models with CO2 measurement for air quality, with 2 touch buttons to control the temperature of the room as well as the mode, or with display to show the measured values or information like time. Available in black and white colours.
NEW AVAILABLE CONTROLLERS:
- 70615 y 70616 Temperature and humidity indoor sensors, WITH display and touch buttons (replacement for a 70370, 70374-75)
70618 y 70619 CO2, temperature and humidity indoor sensors, WITH display and touch buttons (replacement for 70239-70242)
70621 y 70622 Temperature and humidity indoor sensors, WITHOUT display or touch buttons (replacement for 70362-70365)
70624 y 70625 CO2, temperature and humidity indoor sensors, WITHOUT display or touch buttons (replacement for 70234-70237)
For further information, please do not hesitate to contact us via telephone +34.965.95.95.11, e-mail commercial@futurasmus-knxgroup.com or check the ONLINE CATALOGUE.
22 DE AGOSTO DE 2017
NEW GENERATION OF INTESIS GATEWAYS WITH A NEW HARDWARE
Intesis has launched the new generation of IntesisBox gateways, completely renovated and more powerful. This new line of products inherits the best features of their predecessors and incorporate new and interesting functionalities for the systems integrators.
Intesis has more than 17 years of experience in the Building and Home Automation sector are reflected in this new generation of gateways, increasing their commitment to offer the best and most powerful integration solution with the well-known reliability and simplicity of IntesisBox.
NEW GATEWAYS AVAILABLE:
IntesisBox KNX - Modbus Master (TCP & RTU)It has never been so easy to integrate Modbus Slave devices into a KNX project. Any KNX integrator can integrate Modbus RTU Slaves or Modbus TCP Servers, or both at the same time, and translate the Modbus values to the required KNX DPT types in just a few clicks!
- IBKNXMBM1000000 KNX - Modbus TCP & RTU Master (100 points)
IBKNXMBM2500000 KNX - Modbus TCP & RTU Master (250 points)
IBKNXMBM6000000 KNX - Modbus TCP & RTU Master (600 points)
IBKNXMBM1K20000 KNX - Modbus TCP & RTU Master (1200 points)
IBKNXMBM3K00000 KNX - Modbus TCP & RTU Master (3000 points)
Supervise from any BACnet BMS your KNX installation or simply share your KNX data with any BACnet IP or BACnet MS/TP Controller. It includes BACnet Notifications, Calendars, Schedules and Trend Logs. BTL approved.
- IBBACKNX1000000 BACnet / IP & MSTP Server to KNX (100 points)
IBBACKNX2500000 BACnet / IP & MSTP Server to KNX (250 points)
IBBACKNX6000000 BACnet / IP & MSTP Server to KNX (600 points)
IBBACKNX1K20000 BACnet / IP & MSTP Server to KNX (1200 points)
IBBACKNX3K00000 BACnet / IP & MSTP Server to KNX (3000 points)
Integrate any Modbus RTU or TCP Slave device, or both at the same time, with a BACnet BMS or any BACnet IP or BACnet MS/TP controller. It fulfills B-AAC BACnet profile. BTL approved.
- IBBACMBM1000000 BACnet / IP & MSTP Server to Modbus TCP & RTU (100 points)
IBBACMBM2500000 BACnet / IP & MSTP Server to Modbus TCP & RTU (250 points)
IBBACMBM6000000 BACnet / IP & MSTP Server to Modbus TCP & RTU (600 points)
IBBACMBM1K20000 BACnet / IP & MSTP Server to Modbus TCP & RTU (1200 points)
IBBACMBM3K00000 BACnet / IP & MSTP Server to Modbus TCP & RTU (3000 points)
29 DE JULIO DE 2011
KOMTECH IR-Modules
Komtech, the well-known manufacturer for Audio/Video solutions that you can integrate in KNX, released in April 2010 its EIB/IR Module. This has proven to be a very useful product for the integration of most A/V equipments in KNX.
Now, the KOMTECH IR module family is available in four different versions, all of which share the following functionalities:
• Interfaces: 2x RS232; 4x IR; 4x Digital Out
• Integrated IR learing system
• 96 IR commands
• 48 RS232 commands
• 32 macros
• External power supply
• Incl. 2 IR transmitter diodes
Technical differences among them:
EIB/IR Module
LAN/IR Module
WLAN/IR Module
COM/IR Module
Why are these new modules interesting for a KNX professional? Because some of the new KNX visualization programs can send IP and/or RS232 telegrams and can therefore integrate A/V equipment without the need to buy the KNX module (EIB/IR Module).
Now, the KOMTECH IR module family is available in four different versions, all of which share the following functionalities:
• Interfaces: 2x RS232; 4x IR; 4x Digital Out
• Integrated IR learing system
• 96 IR commands
• 48 RS232 commands
• 32 macros
• External power supply
• Incl. 2 IR transmitter diodes
Technical differences among them:
EIB/IR Module
- Integration in EIB/KNX projects
- IR control via EIB or RS232
- EIB/KNX address via enclosed software adjustable
LAN/IR Module
- Media control with integrated LAN connection
- Integration in LAN environment
- IR control via WLAN or RS232
- TCP/IP Address via enclosed software adjustable
WLAN/IR Module
- Media control with integrated WLAN connection
- Integration in WLAN environment
- IR control via WLAN or RS232
- TCP/IP Address via enclosed software adjustable
- Integrated WLAN antenna
COM/IR Module
- Universal useable media module
- IR control via RS232
Why are these new modules interesting for a KNX professional? Because some of the new KNX visualization programs can send IP and/or RS232 telegrams and can therefore integrate A/V equipment without the need to buy the KNX module (EIB/IR Module).
14 DE JUNIO DE 2011
iRidium at Futurasmus KNX Group
Now you canfind in Futurasmus KNX Group iRidium’s solution the control of KNX Systems via iPhone / iPad.
And the good news is we offer you our own product kits with very special conditions:
Basic kit:
Kits avanzados:
Just in case you still don’t know it, this is the basic information:
iRidium turns your iPhone / iPod / iPad or Windows device into the KNX system control panel via one of the most complete solutions in the market.
There is an import of channels and commands from the project ETS. After the import completion, a fast channels and commands binding to the control items (buttons, lists, sliders, text fields, etc.) is performed with the help of the drag&drop function. It has an unlimited funcionality, it supports all kinds of DPT, control items, etc.
With the help of the iRidium GUI Editor you can create beautiful interfaces with animation and magnificent visual effects .
iRidium for KNX contains all the capabilities of other iRidium AV CONTROL product, owing to which you can quickly and easily adjust your AV equipment control.
With the help of iRidium you can also control: AMX, HDL SMART-BUS, AV CONTROL, HELVAR, DOMINTELL, X10, LUTRON, MODBUS, INELS, TECO, CLIPSAL and CRESTRON.
And the good news is we offer you our own product kits with very special conditions:
Basic kit:
- 1 license + gateway for 1 tunnelling connection – 625€
Kits avanzados:
- 1 license + gateway for 5/10 tunnelling/object server simultaneous connections – 695€
- 3 licenses + gateway for 5/10 tunnelling/object server simultaneous connections – 1595€
- 5 licenses + gateway for 5/10 tunnelling/object server simultaneous connections – 2195€
Just in case you still don’t know it, this is the basic information:
iRidium turns your iPhone / iPod / iPad or Windows device into the KNX system control panel via one of the most complete solutions in the market.
There is an import of channels and commands from the project ETS. After the import completion, a fast channels and commands binding to the control items (buttons, lists, sliders, text fields, etc.) is performed with the help of the drag&drop function. It has an unlimited funcionality, it supports all kinds of DPT, control items, etc.
With the help of the iRidium GUI Editor you can create beautiful interfaces with animation and magnificent visual effects .
iRidium for KNX contains all the capabilities of other iRidium AV CONTROL product, owing to which you can quickly and easily adjust your AV equipment control.
With the help of iRidium you can also control: AMX, HDL SMART-BUS, AV CONTROL, HELVAR, DOMINTELL, X10, LUTRON, MODBUS, INELS, TECO, CLIPSAL and CRESTRON.
08 DE OCTUBRE DE 2010
Complete LED control via KNX
LEDs represent the modern lighting trend worldwide (both for interior and facades) and that is a fact.
LEDs have existed for a long time, but have recently been enormously optimized for the lighting of home and building. Once the problems caused by heat generation were solved, there are only advantages:
Since they have become a more and more important issue in home and building automation projects, there are already various ways to integrate LEDs in a KNX System.
We are glad to introduce BILTON, the one manufacturer who is 100% specialized in this technology and KNX. This Austrian company only develops LED lighting and its control systems.
After presenting their two LED actuators at the light+building fair in Frankfurt, now they are already available. Each one is optimized for one the two different LED technologies:
Do not hesitate to contact us or visit our web site for more detailed information. And also keep in mind that BILTON does not only manufacture the KNX controller but also a wide range of LED strips and spotlights (also available in Futurasmus KNX Group)
LEDs have existed for a long time, but have recently been enormously optimized for the lighting of home and building. Once the problems caused by heat generation were solved, there are only advantages:
- Very long-lasting
- Extremely low power consumption
- Small size
- Exceptional brightness
- Total color scheme with endless ambient possibilities
- Less maintenance
Since they have become a more and more important issue in home and building automation projects, there are already various ways to integrate LEDs in a KNX System.
We are glad to introduce BILTON, the one manufacturer who is 100% specialized in this technology and KNX. This Austrian company only develops LED lighting and its control systems.
After presenting their two LED actuators at the light+building fair in Frankfurt, now they are already available. Each one is optimized for one the two different LED technologies:
- KNX DIM-SEQUENCE-ACTOR 12-24 V DC for CONSTANT VOLTAGE CONTROL (interior use - ambient light)
- - 3-channel
- - 2.2 A per channel
- - Very complete KNX application program
- • KNX DIM-SEQUENCE-ACTOR CURRENT for CONSTANT CURRENT CONTROL (façade lighting)
- - Current adjustable: 350 / 500 / 700 mA
- - 24 V DC, nominal voltage
- - Output voltage 22 V
- - From 1 to 6 LED per channel
- - Very complete KNX application program
Do not hesitate to contact us or visit our web site for more detailed information. And also keep in mind that BILTON does not only manufacture the KNX controller but also a wide range of LED strips and spotlights (also available in Futurasmus KNX Group)
