THE ALL-ROUND PARTNER FOR HOME AND BUILDING AUTOMATION WITH KNX

KNX news

Since 1996, when IPAS was established, has developed and manufactured innovative devices, as well as visualization and management software. Many integrators trust IPAS, not only in residential buildings, also in large projects such as airports, stadiums, luxury hotels and museums. As a result, IPAS offers a range of products that meet the requirements demanded by KNX professionals, as well as end-users.

We have selected a total of seven products from the extensive IPAS catalog, in order to offer you a special offer for the Light & Building 2018. PowerBlock actuators, μBrick, DALI gateways, KNXnet/IP gateways and the HCC web server are included.

Take advantage of the opportunity from up to a 20% additional discount* until June 30. You can check the products offered here:

4101-145-01 → Gateway DALI e64 (64 ECGs , 16 groups), web server
4101-145-11 → Gateway DaliControl gc16 (64 ECGs , 16 groups)
3622-141-11 → Visualization with web server Home Control Center (HCC 3.0)
3622-141-07-0B → Gateway CB NCI KNXnet/IP (5 tunelling connections), programming devices
3622-141-17 → Gateway CB IP-R KNXnet/IP Router (5 tunelling connections), 1 object server connection, programming devices
77024-180-01 → Multi-function actuator PowerBlock o8, 8 outputs 16A (8 On/Off or 4 shutter/blinds)
72130-180-11 → Blind actuator μBrick si36, 3 output channels and 6 inputs, máx. 10A resistive loads

Check the whole IPAS range HERE.

Do not miss the offer*, and contact us to request an offer via telephone +34.965.95.95.11 or e-mail commercial@futurasmus-knxgroup.com.


* Limited offer to 1 pc. per customer. Available for orders until June 30, for detailed products. Ask our sales department.

Tweet

The KNX manufacturer Lingg & Janke has a long reputation of more than two decades and is appreciated by professionals thanks to its wide variety of devices, being among the most robust and safest on the market.

Within entire range of Lingg & Janke products, we take the opportunity to launch a special offer of eco+ series because of Light & Building 2018. ON/OFF actuators, ON/OFF actuators with inputs, shutter actuators and push button interfaces are included, which highlighting due to their excellent value for money. eco+ is based on the same hardware used in the standard range of Lingg & Janke actuators, without manual control and much more economic.

Take advantage of the opportunity of 20% additional discount* for any of the 3 packs we offer:

PACK 1

BEA4F230H-E → Switching actuator 4 chanels 16A C-Load, with 4 binary input
A4F16H-E → Switching actuator 4 chanels 16A C-Load
J4F6H-E → Shutter actuator 4 chanels 6A
TS4F-2-E → Push button interface 4 chanels

PACK 2

BEA4F230H-E → Switching actuator 4 chanels 16A C-Load, with 4 binary input
A6F16H-E → Switching actuator 6 chanels 16A C-Load
J6F6H-E → Shutter actuator 6 chanels 6A
TS4F-2-E → Push button interface 4 chanels

PACK 3

BEA8F230H-E → Switching actuator 8 chanels 16A C-Load, with 8 binary input
A6F16H-E → Switching actuator 6 chanels 16A C-Load
J6F6H-E → Shutter actuator 6 chanels 6A
TS8F-2-E → Push button interface 8 chanels

Check the whole Lingg & Janke range HERE.

Do not miss the offer*, and contact us to request an offer via telephone +34.965.95.95.11 or e-mail commercial@futurasmus-knxgroup.com.


* Offer available for orders until June 30, for detailed products. Ask our sales department.

Tweet

Voice control for KNX systems nowadays is a reality, and now with Pairot from XXTER we will also have a gateway which will allow us to use Apple devices, Amazon Echo or Google Home to control or register the status of our home. Pairot is the first KNX bridge with an official certified Apple HomeKit accessory.

Using simple voice commands we can control, for example, lights, shutters, thermostats, scenarios, manage smartmetering devices, know the status of counters, probes, etc.

Easy configuration with the on-line editor from where Pairot is registered, activated and group addresses of our KNX project are imported. The possibilities offered by Pairot from XXTER depends on the accessories used, compatible with:

Siri - Apple HomeKit (Certificación oficial)

Alexa - Amazon Echo

Google Assistant - Google Home (Certificado)

The equipment is available as a DIN rail module 4MW, requires additional supply 5-36Vdc, and has an average consumption of 1W.

You have more information in:

Press release

Installation Manual

Project editing guide with Pairot

Video How to install a Pairot

For further information, please do not hesitate to contact us via telephone +34.965.95.95.11, e-mail commercial@futurasmus-knxgroup.com or check the product PAGE of Pairot from XXTER.

Tweet

Due to the great acceptance of the Mini KNX System pack on offer, from Futurasmus we extend the promotion until January 31st, 2018. You will find everything you need to make a mini KNX system for only 289€*.

This pack will allow you to control 4 ON/OFF circuits and 3 shutters, in addition to having 6 binary inputs and 4 channels for push buttons. All of this with the great experience and quality of IPAS, Lingg & Janke, Interra and Mean Well manufacturers.

The mini KNX system includes:

1pc. PSU KNX 640mA Mean Well - Web Code: 19102

1pc. Actuator 4 channels ON/OFF Lingg&Janke ECO+ - Web Code: 16823

1pc. Actuator 3 shutters + 6 inputs IPAS µBrick si36 - Web Code: 18311

1pc. Push button interface 4 channels Interra - Web Code: 17179

In addition, this pack includes the new shutter actuator μBrick si36 (Web Code: 18311). Discover the new μBrick shutter actuators range from IPAS, the best solution on the market, in this LINK.

Last days, take advantage of this opportunity and do not miss the promotion of the Mini Installation KNX from Futurasmus for only 289€*. Contact us to request an offer via telephone +34.965.95.95.11 or e-mail commercial@futurasmus-knxgroup.com.


*Limited offer to 1pc. per customer. Valid for orders until January 31st, 2018.

Tweet

Due to the great acceptance of the Mini KNX System pack on offer, from Futurasmus we extend the promotion until January 31st, 2018. You will find everything you need to make a mini KNX system for only 289€*.

This pack will allow you to control 4 ON/OFF circuits and 3 shutters, in addition to having 6 binary inputs and 4 channels for push buttons. All of this with the great experience and quality of IPAS, Lingg & Janke, Interra and Mean Well manufacturers.

The mini KNX system includes:

1pc. PSU KNX 640mA Mean Well - Web Code: 19102

1pc. Actuator 4 channels ON/OFF Lingg&Janke ECO+ - Web Code: 16823

1pc. Actuator 3 shutters + 6 inputs IPAS µBrick si36 - Web Code: 18311

1pc. Push button interface 4 channels Interra - Web Code: 17179

In addition, this pack includes the new shutter actuator μBrick si36 (Web Code: 18311). Discover the new μBrick shutter actuators range from IPAS, the best solution on the market, in this LINK.

Take advantage of this opportunity and do not miss the promotion of the Mini Installation KNX from Futurasmus for only 289€*. Contact us to request an offer via telephone +34.965.95.95.11 or e-mail commercial@futurasmus-knxgroup.com.


*Limited offer to 1pc. per customer. Valid for orders until January 31st, 2018.

Tweet