KNX news
21 DE MAYO DE 2018
STEINEL - SPECIAL OFFER LIGHT & BUILDING 2018 – UP TO 28% ADDITIONAL OFF
Since 1959 STEINEL have registered more than 300 patents, designs and models for their inventions. These have resulted in over 2500 products belonging to the best of their kind. Some have even revolutionized entire segments.
STEINEL is synonymous of reliable and guaranteed devices, designed in Germany, manufactured in Europe and with a 5-year guarantee. We can highlight the following singular features for STEINEL sensors:
- Service to make nominative certifications of the equipment placed in installation.
- Twilight sensors protected by glass cover to secure the accuracy.
- Advanced timing and rearm system. After a non-detection the cycle begins again, avoiding idle time up to complete it without possibility to turn on the light again.
- Accurate adjustment of sensor sensitivity.
- Quick response after a detection.
- Materials quality: fire and heat resistant plastics (especially UV rays) allowing equipment to have better tolerance to inclemency, or lenses with metallic elements improving product durability.
Take advantage of the opportunity from up to a 28% additional discount * until June 30.
If you want to know more about STEINEL products, do not miss the demo videos of Control PRO range:
- Presence sensor Control PRO IR Quattro HD
ref.: 008789 – Web Code: 19513
Video HERE
Product page HERE
- Presence sensor Control PRO IR Quattro Slim
ref.: 008888 – Web Code: 19533
Video HERE
Product page HERE
- Motion sensor Control PRO SenIQ S:
ref.: 004057 – Web Code: 19416
Video HERE
Product page HERE
- High frequency motion sensor iHF 3D KNX:
ref.: 007614 – Web Code: 19405
Video HERE
Product page HERE
- Control by app or panel:
Video HERE
Check the whole STEINEL range HERE.
Do not miss the offer*, and contact us to request an offer via telephone +34.965.95.95.11 or e-mail commercial@futurasmus-knxgroup.com.
* Offer available for orders until June 30. Ask our sales department.
04 DE DICIEMBRE DE 2017
FOLLOW US ON FACEBOOK
Are you a facebook follower of Futurasmus?
If you are not, you're missing out content, tips and exclusive offers that we only published on our wall. You want to see what you are missing:
TIPS Y CONTENT:
- Voice control of the KNX system: Check the realKNX server has detected the ProServ KNX-IP gateway – Pack realKNX from BleuCommAzur
- Master/slave mode – Presence detectors SCN series from MDT
- Manual control and test mode – PowerBlock actuator from IPAS
- Touch gestures – HCx screens from Iddero
- Shading control shutter with blinds – Weather station Quadra from BMS
- Java compatibility – eibPort Web Server from Bab Tec
- Voice control of the KNX system: Voice recognition with SIRI outside the house - Pack realKNX from BleuCommAzur
- Windows 10 drivers installation
- Scene at start up - HCx screens and Home Server from Iddero
- License update – CBSE Visualization from IPAS
- 3 year warranty - for all MDT catalog
- Video-tutorials, spots and much more – Futurasmus Youtube channel
- idderocloud – HCx screens and Home Server from Iddero
If you are not a follower of our facebook page yet, give us a like and follow us. On our wall you will find tips, product information, news, promotions, video tutorials, spots, and so on. What are you waiting for? Follow us on facebook.
07 DE NOVIEMBRE DE 2011
Improvements in the application program of the IPAS pushbuttons
Manufacturer IPAS has redesigned the internal hardware of their push-button range, thus replacing their old BCU with an updated version that allows a much more advanced functionality.
Of course, they have kept their modern look, their robustness and the possibility of customization.
We would like to highlight the following updates:
• Complete shutter control with just one key: up, down, stop and slat control.
• Complete dimmer control with just one key: on, off, brightness up and down
• Send 1-byte-values (0…255=0..100%).
• Send two 1-byte-values with just one key, alternate between them (0…255=0..100%).
• Saving and executing scenes
• Increasing or decreasing a 1-byte-value on a step basis (10%,20%,25%,33%,50%)
Currently, the new application program is not available for push-buttons without temperature control, even though it will be ready soon.
The old versions will be discontinued and the new ones keep the same reference number, with ‘-0B’ at the end.
Please, visit the IPAS product pages on our web site and find more information about these and other IPAS products.
Of course, they have kept their modern look, their robustness and the possibility of customization.
We would like to highlight the following updates:
• Complete shutter control with just one key: up, down, stop and slat control.
• Complete dimmer control with just one key: on, off, brightness up and down
• Send 1-byte-values (0…255=0..100%).
• Send two 1-byte-values with just one key, alternate between them (0…255=0..100%).
• Saving and executing scenes
• Increasing or decreasing a 1-byte-value on a step basis (10%,20%,25%,33%,50%)
Currently, the new application program is not available for push-buttons without temperature control, even though it will be ready soon.
The old versions will be discontinued and the new ones keep the same reference number, with ‘-0B’ at the end.
Please, visit the IPAS product pages on our web site and find more information about these and other IPAS products.
29 DE JULIO DE 2011
KOMTECH IR-Modules
Komtech, the well-known manufacturer for Audio/Video solutions that you can integrate in KNX, released in April 2010 its EIB/IR Module. This has proven to be a very useful product for the integration of most A/V equipments in KNX.
Now, the KOMTECH IR module family is available in four different versions, all of which share the following functionalities:
• Interfaces: 2x RS232; 4x IR; 4x Digital Out
• Integrated IR learing system
• 96 IR commands
• 48 RS232 commands
• 32 macros
• External power supply
• Incl. 2 IR transmitter diodes
Technical differences among them:
EIB/IR Module
LAN/IR Module
WLAN/IR Module
COM/IR Module
Why are these new modules interesting for a KNX professional? Because some of the new KNX visualization programs can send IP and/or RS232 telegrams and can therefore integrate A/V equipment without the need to buy the KNX module (EIB/IR Module).
Now, the KOMTECH IR module family is available in four different versions, all of which share the following functionalities:
• Interfaces: 2x RS232; 4x IR; 4x Digital Out
• Integrated IR learing system
• 96 IR commands
• 48 RS232 commands
• 32 macros
• External power supply
• Incl. 2 IR transmitter diodes
Technical differences among them:
EIB/IR Module
- Integration in EIB/KNX projects
- IR control via EIB or RS232
- EIB/KNX address via enclosed software adjustable
LAN/IR Module
- Media control with integrated LAN connection
- Integration in LAN environment
- IR control via WLAN or RS232
- TCP/IP Address via enclosed software adjustable
WLAN/IR Module
- Media control with integrated WLAN connection
- Integration in WLAN environment
- IR control via WLAN or RS232
- TCP/IP Address via enclosed software adjustable
- Integrated WLAN antenna
COM/IR Module
- Universal useable media module
- IR control via RS232
Why are these new modules interesting for a KNX professional? Because some of the new KNX visualization programs can send IP and/or RS232 telegrams and can therefore integrate A/V equipment without the need to buy the KNX module (EIB/IR Module).
